|
Email: superlumination@cox.net |
Compact - High Efficiency - Versatile
Under Counter & Cabinet Top Modular Mini-Track Lighting Systems
Your Choice
 |
 |
| MR16 System | 44mm festoon bulb system |
Click Here for Installation Instructions & Tips
Click Here to purchase MR16 bulbs
Click Here to purchase Festoon bulbs
Click Here for full Size Track Lights
Features:
-
Compact, & lightweight.
-
Low power usage when combine with leds
-
Almost no heat when used with leds
-
Totally modular design can be easily cut to fit any length, or any space.
-
Designed to add light at any spacing desired. Space lights close together for more brightness... spread them out for more subtle lighting.
-
Lowest cost track style lighting system available anywhere.
-
Bulbs are replaceable.
-
Modular design works with either 44mm festoon bulbs or MR16 bulbs by just adding a simple MR16 adapter.
-
Modular design allows for snap together installation. Can be assembled. disassembled, moved, reused, and even rearranged over and over.
-
Easy to clean.
-
Can be cut or combined to make any length. Cuts clean in seconds with wire cutter and hack saw.
Uses:
-
Great for RV's & boats where low power consumption is desired.
-
Operates on either 120volt ac (using any 120 volt to 12 volt transformer) , or direct 12-14 volt DC or AC current. Note: BUlbs must match system voltage.
-
Mounts under cabinets, on top of cabinets, under counter tops, on ceilings, under shelves, under mantels, in book cases, closets over aquariums, inside window sills, on plant shelves.........
* Power Consumption:
-
Each 18led MR16 bulb uses 180 milliamps of power. Costs $.06 to light for 24 hours a day for a whole month!
-
Each 9led 44mm festoon bulb uses 30 milliamps of power. Costs $.01 to light for 24 hours a day for a whole month!
Click Here for Installation Instructions & Tips
Click Here to purchase MR16 bulbs
Click Here to purchase Festoon bulbs
Click Here for full Size Track Lights
System Components:
| Photo | Description | Dimensions | Price | Weight | |
 |
Wire Cap | 25mm
x 15mm x 7mm 1" x 5/8" x 1/4" |
$.29 ea.
|
.1 ounce | |
|
2-Conductor Bus Wire (Stranded Copper) |
12mm
x 4mm x Length 15/32" x 5/32" x length |
$.65/ft.
|
.8 ounces/ft. | |
  |
Lamp Holder (for 44mm festoon bulbs). |
48mm x 18mm x 24mm
Ht. 1-7/8" x 11/16" x 15/16" Ht. |
$1.29 ea.
|
.4 ounce | |
 |
MR16 Adapter Socket | 44mm x 28mm x 20mm
Ht. 1-3/4" x 1-1/8" x 3/4" Ht. |
$1.99 ea.
|
.7 ounce | |
 |
Track | 20mm x 10mm x
1000mm
7/8" x 3/8" x 39" |
$3.99 ea.
|
.7 ounce | |
 |
Track Cover | 24mm x 6mm x
1000mm
15/16" x 1/4" x 39" |
$2.99 ea.
|
.7 ounce | |
 |
120 VAC to 12 VAC
Transformer 20-50 watt max. |
79mm x 47mm x 32mm
Ht. 3-1/8" x 1-7/8" x1-1/4" Ht. |
$7.99 ea.
|
.7 ounce | Capacity:
|
 |
120 VAC to 12 VDC
Transformer 18 watt max. |
72mm x
55mm x 48mm
Deep 2-7/8" x 2-1/8" x1-7/8" Deep |
$11.99 ea.
|
 1 lb |
Capacity:
|
 |
120 VAC to 12 VDC
Transformer 7 watt max. |
60mm x
49mm x 42mm
Deep 2-1/2" x 1-7/8" x1-7/8" Deep |
$7.99 ea.
|
 8 oz |
Capacity:
|
 |
120 VAC to 12 VDC
Transformer 3.5 watt max. |
70mm x
40mm x 40mm
Deep 2-3.4" x 1-3/4" x1-1/2" Deep |
$3.99 ea.
|
4 oz |
Capacity:
|
|
|
120 VAC to 12 VDC
Transformer 5 watt max. |
70mm x
40mm x 40mm
Deep 2-3.4" x 1-3/4" x1-1/2" Deep |
$4.99 ea.
|
5 oz |
Capacity:
|
 |
MR16 Kit with Transformer | Kit includes:
|
$26.99
ea.
|
10 ounces | Not included, but
required:
|
|
|
MR16 Kit (no transformer) | Kit includes:
|
$19.99
ea.
|
10 ounces | Not included, but
required:
|
|
|
44mm Festoon Kit with Transformer | Kit includes:
|
$19.99
ea.
|
10 ounces | Not included, but
required:
|
|
|
44mm Festoon Kit (no transformer) | Kit includes:
|
$12.99 ea.
|
10 ounces | Not included, but
required:
|
|
|
In-line cord switch | $2.99 ea.
|
2 ounces | ||
 |
6' white power cord |
Includes:
|
$7.99 ea.
|
3 ounces |
|
 |
Quick snap wire splice. |
$.29 ea.
|
1 ounce |
 |
 |
 |
Bus wire is heavy duty stranded copper. Ribbed channels fit into the contoured bottom of the lamp holder for perfect alignment. | Bus wire is marked with a scale for easy measuring. Rubber cap insulates the wire end. |
 |
|
 |
MR16 Light swivels and rotates for perfect positioning. | MR16 pivot fixture snaps right into the festoon lamp holder to convert to MR16 bulbs. |
 |
|
 |
Metal prongs connect to bus wire when bus wire is sandwiched between the lamp holder top and bottom | Festoon bulb snaps into the lamp holder and then can be rotated in place, to change the direction of the light beam |
 |
|
|
Lamp holder with 44mm 9led festoon bulb and bottom snapped into place. Bottom can be removed by pushing tabs with a small screw driver. Lamp holder can be repositioned onto bus wire over and over again. | Lamp holder shown with track cover on right side and no track cover on the left side. |
 |
|
 |
Track can be screw mounted or stuck to any surface using two sided tape, or silicone glue/caulk. | Transformer is wired for standard 120 volt household current, and converts to 12 volts output, to power the bus wire and operate the low voltage lighting. |
|
Installation
| Step 1 | Cut Bus Wire to Length. |
|
| Step 2 | Position and snap lamp holders onto bus wire sandwiching the bus wire between the top and bottom of the lamp holder. |
 |
| Step 3 | Snap lamp holders with bus wire into track. |
 |
| Step 4 | Cut Track covers to length and snap onto track in between lamp holders. |
 |
| Step 5 (Festoon) |
Install festoon bulbs. Insert one side of bulb into the hole, so bulb is at a 45 degree angle, and then press the other side of the bulbs down. Remove bulbs using a small screw driver. Pry outward on the metal tip of the bulb on one side. |
 |
| Step 5 (MR16) |
Snap MR16 pivot fixtures in to place. |
 |
| Step 6 (MR16) |
Install MR16 lights. |
 |
Click Here to purchase MR16 bulbs
Click Here to purchase Festoon bulbs
Click Here for full Size Track Lights
Click Here for Installation Instructions & Tips
Pictures of 39 inch light kits, with four 18led MR16 light bulbs:
Notice you can mix any color bulbs you like:
 |
 |
 |
 |
 |
 |
| White | Blue | Green | Amber | Red | Red & Green |
Click Here for Installation Instructions & Tips
Pictures of 39 inch light kits, with four 9led festoon light bulbs:
Notice you can mix any color bulbs you like:
 |
 |
 |
 |
 |
 |
| White | Blue | Green | Xenon | Red | Red & Green |
Standard Rates (US Only)
*Via US Postal First Class Mail
* Orders weighing more than 1 lb will ship via parcel post unless special shipping options are added (below).
Shipping & Handling
|
Total Order |
Cost |
| $.01-$9.99 | $2.00 |
| $10.00-$49.99 | $2.50 |
| $50.00-$99.99 | $5.00 |
| $100-$199.99 | $10.00 |
| $200+ | $15.00 |
*Note: If you do not add any special shipping options to your order, we will automatically ship via US postal first class mail.
You must choose a special shipping option (see below) in order to get a tracking number.
All International orders must choose an international shipping option.
UPIC Shipping Insurance
Just $1.30 for up to $100 of merchandise
For each $100 of Insurance
Note: Our
packages are not automatically insured against loss
during shipping. Insurance is the responsibility
of the purchaser!
$1.30 for each $100 unit of
insurance
Shipping Insurance
$1.30 per $100